DIY Acoustic Panel Installation Guide

Installing your wooden acoustic wall panels is easier than you think. With the right tools and our simple

step-by-step guide, you can improve your interior's acoustics and aesthetics in just a few hours. Whether

you're using adhesive or screws, our panels are designed for fast, secure, and stylish installation.

Tools You'll Need

- Measuring tape

- Circular saw or sharp handsaw

- High tack adhesive (optional)

- Screwdriver or drill

- Drywall screws (32mm, diameter >= 4.8mm)

- Utility knife

- Spirit level

- Cleaning cloths and surface degreaser

Step 1: Measure your wall height and trim the panels to size using a circular saw or sharp handsaw.

Step 2: Clean the installation area thoroughly. Make sure it's flat, dry, and free of dust, screws or grease.

Step 3: Apply high tack adhesive evenly across the back of the panel. Use a smooth motion to ensure full

coverage.

Step 4: Press the panel firmly onto the wall in the correct position. Hold for several seconds to ensure

contact.

Step 5: Use a utility knife to trim the final panel's felt edge for a clean finish.

Note: Position your panels carefully before applying adhesive. Once set, repositioning is difficult.

Step 1: Measure and cut the panels to fit your wall or ceiling area.

Step 2: Clean the surface and remove any debris or screws.

Step 3: Attach horizontal battens or mounting strips spaced no more than 30cm apart.

Step 4: Mount each panel using 12 screws per panel. Drive screws directly through the felt layer into the

Step 5: Trim excess felt at the end panel using a sharp blade, leaving the wood edge exposed for a finished

battens.

look.

Pro Tip: Use black or grey screws that match the felt color for a discreet finish.

You can order our high-quality adhesive or screw kits directly from our store. Have questions or need help?

Visit our FAQ page or contact us via our website. Our support team is happy to guide you through your

installation.